2018 John Deere 8400

Selling Price -

$339,000.00

JD 8400 SPFH, PRWD, 40% DIFFERENTIAL ON DEERE KP, 8 ROW SPOUT, DUAL HEADER DRIVE, AUTO PTO COUPLER,40 KNIFE CUTTERHEAD, PRO DRIVE, AUTOLUBE SYSTEM,PREMIUM LED LIGHTING PACKAGE, ELECTRIC KP ADJUST

Information

  • Kernel Processor:Yes
  • Axle:PRWD
  • 40 knife cutterhead
  • 40% differential speed on Deere KP
  • 8 row spout
  • dual header drive
  • auto pto coupler
  • pro drive

Photos

Highlights

  • $339,000.00
  • DYERSVILLE
  • Pre-Owned
  • 59139
  • 2018
  • John Deere
  • 8400
  • 1Z08400YKJR517311
  • 6090HZ013
  • 1241
  • Available
  • Feed Rolls, front: 26 in | Cutterhead housing: 27 in | Cutterhead w/ knives: 26.7/26.3 in | Kernel Processor, 118 tooth serrated roll, Quick KP swing in/out Roll width: 25, 9.5 in
  • Working: 22 ft

Specifications

  • 2018
  • John Deere
  • 8400
  • Base
  • General
  • 6090HZ013
  • John Deere PowerTech™
  • PSX
  • Rated @ 2100 rpm: 495 hp (502 ps) | Maximum power @ 1800 rpm: 532 hp (540 ps) | Engine RPM on road: 1140-2100
  • Tier 4 fnal
  • 13.5 L
  • In-line 6
  • fan drive: Direct
  • Dura-Drum™ Cutterhead: 1100 rpm
  • Unit Injectors + 4 valves
  • Dry Clutch
  • Number of discs: 1 | Main driveband: Re-inforced with kevlar inserts | Belt tensioning: Active, hydraulic pressure | Main polybelt driveband: no. of belts: 6
  • Hydrostatic, 3 speed - manual shift, helical gears
  • Maximum: 12.4 / 15.5 / 18.6 mph (20 / 25 / 30 km/h) | Speed differential Upper/Lower: 32 % | Speed @ rated: 1800 rpm
  • 710/70R42
  • 620/60R30
  • Frame opening: Swing-away, 37-45 degree angle | Roll spacing: 1.0 - 5.0 mm | Spout Rotation: 210° | Spout Reach from center line: 15.5 ft
  • Feed Rolls, front: 26 in | Cutterhead housing: 27 in | Cutterhead w/ knives: 26.7/26.3 in | Kernel Processor, 118 tooth serrated roll, Quick KP swing in/out Roll width: 25, 9.5 in
  • / Housing Width: 23 / 21 in
  • of Cut: 40 knives: 7 - 26 mm (.275 - 1.0 in) 1 mm (.04) increments | 48 knives: 6 - 22 mm (.24 - .87 in) 1 mm (.04) increments
  • (w/o header) 21.4 ft
  • (w/o header) 9.84 -11.5 ft
  • (to cab roof) 12.75 ft
  • Working: 22 ft
  • 290 gallon (1100 L) | Large volume innoculant tank: 95 gallon
  • 13 gallon
  • Feed Rolls Number: 4 | Feed Rolls Metal detector: Standard | Hydro Feed roll drive IVLOC: Standard | Infnitely variable header drive speed: Standard | Number of knives: 40 or 48 | Dura-Drum™ Cutterhead Shear bar, reversible: Standard | KernelStar Kernel Processor, disk type, 240mm diameter Number of disks (top/bottom): 15/14 + 2.5 | Crop Accelerator Number of blades: 10 | Spout Hydraulic raise and lower: Standard