2019 John Deere X739 48-in Accel

Selling Price -

$10,950.00

2019 John Deere X73960 inch auto connect deck Hydro transmission Gas engineAWS4WDMachine will include bagger and power flow Please contact Ben Blasberg with any questions319-215-2619

Information

  • Width:60 in
  • Transmission:Hydro
  • Engine Type:Gas
  • Drive Type:AWD
  • AWS, 4WD, 60" Auto Connect deck, Bagger and power flow

Photos

Highlights

  • $10,950.00
  • NEW HAMPTON
  • Pre-Owned
  • 60205
  • 2019
  • John Deere
  • X739 48-in Accel
  • 1M0X739AHKM080171
  • Model: FD750D EFI
  • 285
  • Gasoline
  • Available
  • With mower: 64.5 in. (163.8 cm) | With mower (deflector raised for storage): 57.5 in. (146.1 cm) | Without mower: 48 in. (121.9 cm)
  • 51.2 in. (130 cm) | Mower cut: 1-5.25 in. (2.5-13.3 cm) | Cut increments: 0.25 in. (0.64 cm)

    • Specifications

    • 2019
    • John Deere
    • X739
    • 48-in Accel
    • Riding
    • Model: FD750D EFI
    • Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
    • 25.5 hp (19 kW)
    • 45.5 cu in. (745 cc)
    • V-twin, cast-iron liners
    • Mechanical
    • No choke required
    • Liquid
    • Dry, replaceable with foam precleaner
    • Transaxle: Replaceable suction side 10 micron
    • Gasoline
    • Delivery: Electronic fuel injection
    • Gauge on dash
    • Hydraulic power
    • Mower: Hydraulic clutch, shaft | Attachability: haft or AutoConnect
    • Standard
    • Fuel tank location: Rear | Hourmeter | Taillights | 12-V outlet | Cruise control | Oil cooler | Primer/paint: E-coat/powder | Weight bracket: Standard front - holds up to four Quik-Tatch weights, 42 lb (19 kg) | Receiver hitch: front | Floor mats: Sure-grip rubber | Storage: Covered toolbox | Service interval decal | Handles | Cup holder | All-wheel steer | Tilt steering wheel: Standard, six position | Hydraulic outlets: Four, standard | Preset cut height | Mower deck: Side discharge | Mower wash port | Attachability: Roll under tractor
    • Internal wet disc
    • Welded heavy-duty
    • JDM BA8 nodular iron casting
    • 18x8.5-10 HDAP
    • 26x12-12 HDAP
    • Mower: Four | Mower wheels rotate: Yes, 90 degrees for easy mower removal (48X), (54 HC, 60 HC)
    • Engine: Solenoid shift
    • Flywheel alternator, regulated, 20 amp
    • 12 V (300 CCA)
    • Transaxle Forward speed: 0-8.5 mph (0-13.7 km/h) | Transaxle Reverse speed: 0-6 mph (0-9.7 km/h)
    • Fuel fill opening, On left fender: 3 in. (7.6 cm ) | Steering, Uncut circle radius: 10 in. (25.4 cm)
    • 75 in. (190.5 cm)
    • 51.2 in. (130 cm) | Mower cut: 1-5.25 in. (2.5-13.3 cm) | Cut increments: 0.25 in. (0.64 cm)
    • With mower: 64.5 in. (163.8 cm) | With mower (deflector raised for storage): 57.5 in. (146.1 cm) | Without mower: 48 in. (121.9 cm)
    • 55.7 in. (141.5 cm)
    • 60 in. (152 cm)
    • Steering: 25 in. (63.5 cm) | Uncut circle radius: 28 in. (71.1 cm)
    • Back: 21 in. (53.3 cm)
    • 14 in. (35.6 cm)
    • Tank: 5.2 U.S. gal. (19.7 L)
    • No fuel or mower: 1,045 lb (474 kg)
    • Backup lights | Rear work lights
    • Two standard, halogen, 37 W
    • Meets ANSI standard | Meets OPEI standard | Safety video
    • Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm) | Mower wheel: Spring-loaded pin | Mower level: Exact Adjust ports and onboard deck-leveling gauge
    • Two piece professional high back | Suspension: Six-position parallel arm
    • Type: Two-function hydraulic
    • Hood: Noryl GTX902, painted
    • Fender: RIM with in-mold paint | Mower: Stamped steel deck shell, 60 HC, 9 gauge 0.15 in. (3.8 mm)
    • Bushings: Metal, replaceable
    • Arms (Front/Rear): Overcenter / V-align
    • A used warranty may be available. Contact dealer for details.