2016 JD X590, 54" DECK, 47" SNOWBLOWER, 10P CART, REAR WHEEL WEIGHTS, DECK HAS MULCH CONTROL ATTACHMENT. VERY GOOD CONDITION, BEING SOLD AS ONE PIECE.
Information
- Width:54 in
- Transmission:Hydro
- Engine Type:Gas
- Drive Type:2WD
- 47" snowblower
- John Deere 10P cart
- mulch control on deck
- rear wheel weights
- very good condition
Highlights
- $6,900.00
- DYERSVILLE
- Pre-Owned
- 56194
- 2016
- John Deere
- X590 48 Inch Deck
- 1M0X590ECGM111378
- 24
- 220
- Gasoline
- Available
- w/ Mower: 48X, 58.5 in. (148.6 cm) 54X, 64.5 in. (163.8 cm) / Width without mower: 41 in. (104.1 cm)
- 52 in. (132.1 cm)
Specifications
- 2016
- John Deere
- X590
- 48 Inch Deck
- Riding
- 25.5 hp (19 kW)
- 44.3 cu in. (726 cc)
- FS730 EFI
- Electronic fuel injection (EFI), Overhead valve (OHV)
- V-twin, cast-iron liners
- Constant-speed electronic
- /speed control: No choke required
- Method: Air
- Dry, replaceable with foam precleaner
- Drain: No tools
- Gasoline
- Primer/paint: E-coat/powder
- Gauge on dash
- 4.4 U.S. gal. (16.7 L)
- 12 V (500 CCA)
- Flywheel alternator, regulated, 15 amp
- In-line belt
- K72 hydrostatic integrated with transaxle
- Forward speed:0-7.2 mph (0-11.6 km/h) / Reverse speed: 0-5.2 mph (0-8.4 km/h)
- Open-back design with grasp / Fore-aft adjustment: While seated, slide rail, 14-position, 7 in. (17.8 cm)
- Seat: Steel springs, three-position no-tools adjustment for operator weight
- Hydraulic power
- Internal wet disc
- Fully welded
- Cast iron front axle, front wheel ball bearings
- Metal, replaceable / Hood material: Molded-in color hood material reduces sound, will not rust or dent / Fender deck material: Stamped steel
- 16x6.5-8 turf
- 24x12-12 turf
- Mower: Four / Seven-position, spring-loaded pin / Level adjustment: Exact Adjust ports and onboard deck-leveling gauge
- Power, two-wheel steer
- 14 in. (35.6 cm)
- 52 in. (132.1 cm)
- 79 in. (201 cm)
- 51.2 in. (130 cm)
- w/ Mower: 48X, 58.5 in. (148.6 cm) 54X, 64.5 in. (163.8 cm) / Width without mower: 41 in. (104.1 cm)
- 22 in. (55.9 cm) / Circle radius: 24 in. (61 cm)
- 21 in. (53.3 cm)
- Mower height: 13 positions, 1-4 in. (2.5-10.2 cm) / Cut height: 0.25 in. (0.64 cm)
- 48, 54 in. (122, 137 cm)
- Stamped steel deck shell / 48X - 11, 54X - 10 gauge 0.120, 0.135 in. (3, 3.4 mm)
- 48X Mower, no fuel, 790 lb (358 kg) 54X Mower, no fuel, 820 lb (372 kg)