2025 John Deere X500 Select Series X580

Selling Price -

$7,500.00

2025 John Deere X580, 54 Inch deck,Hydro transmission, Gas engine, 2WD, Pleasecontact Lloyd Phillips with any questions319-240-6183

Information

  • Width:54 in
  • Transmission:Hydro
  • Engine Type:Gas
  • Drive Type:2WD

Photos

Highlights

  • $7,500.00
  • NEW HAMPTON
  • Pre-Owned
  • 61449
  • 2025
  • John Deere
  • X500 Select Series X580
  • 1M0X580ALRM200494
  • Model: FR730V
  • 24
  • 116
  • mounting: Yes, heavy duty
  • Gasoline | tank location: Rear
  • Available
  • with mower: 1737 mm (68.4 in.) | with mower (deflector raised for storage): 1481 mm (58.3 in.) | without mower: 1034 mm (40.7 in.)
  • Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1338 mm (52.7 in.)

    • Specifications

    • 2025
    • John Deere
    • X500 Select Series
    • X580
    • Riding
    • Model: FR730V
    • 17.9 kW (24 hp)
    • 726 cc (44.3 cu in.)
    • Overhead valve, full-pressure lube, oil filter
    • V-twin, cast-iron liners
    • Mechanical
    • method: Air
    • Dry, replaceable
    • Bendix
    • delivery: Pulse pump and carburetor
    • Gasoline | tank location: Rear
    • Gauge on dash
    • speed control: Separate levers, automatic choke return
    • Power, hydraulic
    • Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Dual belts
    • Internal wet disc
    • 24x12-12 HDAP
    • 16x6.5-8 turf
    • Mower: Four
    • 12 V / 340 CCA
    • Flywheel alternator, regulated, 12 amp
    • Forward: 0-11.6 km/h (0-7.2 mph) | Reverse: 0-8.4 km/h (0-5.2 mph)
    • mounting: Yes, heavy duty
    • Welded heavy-duty
    • Headlights: Two standard, incandescent, 27 W | Taillights or reflector: Reflectors
    • Backup protection: Reverse Implement Option (RIO)
    • Fuel fill opening On left fender: 7.6 cm (3 in.) | Steering wheel: 35.6 cm (14 in.) | Fore-aft adjustment - While seated, ball bearing slide rail, 15-position: 17 cm (6.6 in.) | Mower deck material: 10 gauge 3.4 mm (0.135 in.) | Mower wheels rotate: 90 degrees for easy mower removal
    • Accel Deep™ mower deck: 137 cm (54 in.)
    • 55.9 cm (22 in.) | Uncut circle: 61 cm (24 in.)
    • back: 53 cm (21 in.)
    • Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1338 mm (52.7 in.)
    • 1966 mm (77.4 in.)
    • 1300 mm (51.2 in. )
    • with mower: 1737 mm (68.4 in.) | with mower (deflector raised for storage): 1481 mm (58.3 in.) | without mower: 1034 mm (40.7 in.)
    • tank: 16.7 L (4.4 U.S. gal.)
    • Maximum: 363 kg (800 lb)
    • bracket- front and rear - each holds up to four Quik-Tatch: 19 kg (42 lb) | 352 kg (777 lb)
    • Transaxle type: K72 hydrostatic integrated with transaxle | Transaxle control: Twin Touch™ pedals | Cruise control: Yes, button on dash | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Yes, covered toolbox | Fender handles/grips: Handles | Mower deck: Side discharge | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
    • change: No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Yes, replaceable
    • Hydraulic | system type: Foot pedal with adjustable spring assist
    • Front axle: Cast iron front axle, front wheel ball bearings | Spindle bushings: Metal, replaceable | Hood: Fully enclosed, molded-in color material reduces sound, will not rust or dent | Mower deck: Forged steel deck shell
    • Fender: Stamped steel
    • Cut-and-sewn high-back | suspension: Six-position parallel arm
    • Mower Wheel: Seven-position, spring-loaded pin | Mower level: Exact Adjust ports and deck-leveling gauge
    • A used warranty may be available. Contact dealer for details.