Back

2024 John Deere 324G

2024 JD 324G SKID LOADER, CAB WITH HEAT AND A/C, EH JOYSTICK CONTROLS, TWO SPEED, NEW 78" CONSTRUCTION BUCKET, NEW 12 X 16.5 TIRES, LED LIGHTS, ONE SET OF COUNTERWEIGHTS, FACTORY WARRANTY UNTIL MAY 2, 2026 OR 2000 HOURS
MoreLess
Limited Time Offer!

Selling Price -$59,900.00
No Images Available

Selling Price -

$59,900.00

HD Certified Pre-Owned
  • Operators Station:Cab w/ AC
  • Operators Station:EH Joystick Controls
  • Operators Station:Air Ride Seat
  • Powertrain:2 Speed
  • Booms:Self-Leveling
  • Tires:Beefy Baby Tires
  • Buckets:78" Bucket
  • WILL HAVE NEW 78" CONSTRUCTION BUCKET W/EDGE, NEW 12X16.5 TIRES, ONE SET OF REAR WEIGHTS, LED LIGHTS
  • 2024
  • John Deere
  • 324G
  • Base
  • General
  • 4TNV98CT
  • Yanmar
  • Tier 4
  • Turbo
  • 203 Inches³ (3.3 ltr)
  • SAE Net: 70 hp (52.5 kW) | SAE Gross: 74 hp (55 kW) | Hydraulic Power: 41.5 hp (31.009 kW)
  • 2500 rpm
  • Max. Gross: 207 lbf / ft (280 Nm) | Axle Torque - Maximum: 4994 lbf / ft (6771 Nm)
  • Drive Chain Rating: 80 - HD
  • 12 - 16.5 - 12 PR SKS
  • Tipping Load - Foundry: 5380 lbs (2443 kg) | Breakout - Lift Foundry: 5250 lbf (23.3 kN) | Breakout - Bucket Foundry: 8750 lbf (38.9 kN)
  • 6.9 mph (11.1 kph)
  • 3450 PSI (237.87 bar)
  • Output: 21 gallons (US) / min (78 lt/min)
  • Rear Departure Angle: 28 Degrees | Dump Angle: 41 Degrees | Rollback - Ground Level: 34 Degrees
  • No Bucket: 112.3 inches (2850 mm) | With Bucket Foundry: 136.3 inches (3460 mm)
  • No Bucket: 67 inches (1700 mm)
  • 81.1 inches (2060 mm)
  • To Hinge Pin: 126 inches (3200 mm) | Dump Height - Maximum Foundry: 102.1 inches (2590 mm) | Reach - Max Dump Height Foundry: 29.9 inches (760 mm)
  • 9.3 inches (240 mm)
  • 44.2 inches (1120 mm)
  • 21 gallons (US) (79 ltr)
  • Rated Operating Capacity - Foundry: 2690 lbs (1221 kg)
  • Foundry: 7700 lbs (3496 kg)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $59,900.00
  • ELKADER
  • Pre-Owned
  • 59930
  • 2024
  • John Deere
  • 324G
  • 1T0324GKPRJ467249
  • 4TNV98CT
  • 180
  • Available
  • No Bucket: 67 inches (1700 mm)
  • To Hinge Pin: 126 inches (3200 mm) | Dump Height - Maximum Foundry: 102.1 inches (2590 mm) | Reach - Max Dump Height Foundry: 29.9 inches (760 mm)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.