Back

2020 John Deere 1585

loaded 1585 with 72" deck,MCS, snow blower, salt spreader, lots of extra lights and 3 cameras
MoreLess
Limited Time Offer!

Selling Price -$39,500.00
No Images Available

Selling Price -

$39,500.00

HD Certified Pre-Owned
  • Width:72 in
  • Engine Type:Gas
  • Drive Type:AWD
  • 60" snowblower
  • rear mounted salt spreader only used a few times
  • 3 rear view cameras
  • lots of extra lights
  • 2020
  • John Deere
  • 1585
  • Base
  • General
  • Model: 3TNV88C
  • Gross: 37.4 hp (27.5 kW)
  • 3,000 rpm
  • Three
  • 100.2 cu in. (1.64 L)
  • At 1,950 rpm: 80.4 lb-ft (109 Nm)
  • Liquid
  • Dual element dry type
  • Diesel (B20 compatible)
  • Direct
  • Hydrostatic full time 4WD, on-demand
  • Speed and direction control: Two-pedal foot
  • Hydraulic cylinder | Turns lock-to-lock: 2 maximum, 1.5 minimum
  • Internal wet disk
  • Drive: 26x12-12 | Steering: 20x10-10
  • 11x4-5 | Type: Flat free
  • 12 V
  • 95 amp
  • Automotive type
  • Hi forward: 0-8 mph (0-12 km/h) | Blade tip: 18,000 fpm (5,486 m/min) | Range: 0-15 mph (0-24 km/h)
  • Open center | Spool valve: Front lift, standard
  • 6.3 U.S. gpm (23.8 L/min)
  • Two
  • 7 gauge 0.18 in. (4.6 mm)
  • Mower deck size: 60 in. (152 cm) / 72 in. (183 cm)
  • 49.2 in. (17.8 cm)
  • 7 in. (16.5 cm)
  • 86.7 in. (220.2 cm)
  • With 26x12 tires, wide stance: 58 in. (147 cm)
  • 85.2 in. (216 cm)
  • Cutting: 1-6 in. (2.54-15.24 cm)
  • 60 in. (152 cm) / 72 in. (183 cm)
  • 16 U.S. gal. (60.6 L)
  • Net weight, without mower or fuel: 2,593 lb (1,176 kg)
  • Tensioning: Spring loaded
  • One-piece stamped steel; 7-Iron PRO
  • A used warranty may be available. Contact dealer for details.
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $39,500.00
  • WAUKON
  • Pre-Owned
  • robert
  • 2020
  • John Deere
  • 1585
  • 1TC1585VALS060143
  • Model: 3TNV88C
  • 832
  • Hydrostatic full time 4WD, on-demand
  • Diesel (B20 compatible)
  • Available
  • Cutting: 1-6 in. (2.54-15.24 cm)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.