2017 Caterpillar 279D, Cab with Heat & AC, ISOcontrols, Standard Flow Hydraulics, 2 speed, Widetracks, Power Quick Tatch, Radio, 74 hp,9,900 LBS weight, clean track machine withexcellent service history from a localcontractor. Please contact Joe with any questions at 563 380 0928.
MoreLess
Limited Time Offer!
Selling Price -$36,900.00
Selling Price -
$36,900.00
- Operators Station:Cab w/ AC
- Operators Station:ISO Pattern
- Operators Station:EH Joystick Controls
- Powertrain:2 Speed
- Booms:Self-Leveling
- Tracks:Rubber Tracks
- Buckets:78" Bucket
- 2017
- Caterpillar
- 279D
- Base
- General
- Cat C3.3B DIT (turbo)
- Gross Power SAE J1995: 110.0 hp | Net Power: 73.2 hp | Net Power SAE 1349: 73.2 hp | Net Power ISO 9249: 73.9 hp
- Peak Torque at 1,500 rpm SAE J1995: 195.0 lbf-ft
- 3.7 in
- 4.7 in
- 203.0 in3
- Travel Speed Forward One Speed: 4.5 mph mph | Travel Speed Reverse Two Speed: 7.0 mph
- Standard: Loader Hydraulic Pressure: 3335.0 psi | Standard: Loader Hydraulic Flow: 20.0 gal/min | Standard: Hydraulic Power (calculated): 44.0 hp hp | High Flow: Loader Hydraulic Pressure: 4061.0 psi | High Flow: Loader Hydraulic Flow: 32.0 gal/min | High Flow: Hydraulic Power (calculated): 76.0 hp
- (320 mm/12.6 in track): 5.6 psi | (400 mm/15.7 in track): 4.6 psi
- Tipping Load: 5870.0 lb | Breakout Force, Tilt Cylinder: 7285.0 lb | Rated Operating Capacity: 50% Tipping Load: 2935.0 lb | Rated Operating Capacity: 35% Tipping Load: 2055.0 lb | Contact Area (320 mm/12.6 in track): 1373.0 in2 | Contact Area (400 mm/15.7 in track): 1716.0 in2
- Inside Cab: 83.0 dB(A) | Outside Cab: 103.0 dB(A)
- Departure Angle: 32° | Maximum Dump Angle: 39° | Reach at Maximum Lift and Dump: 23.9 in | Clearance at Maximum Lift and Dump: 89.9 in | Maximum Reach with Arms Parallel to Ground: 51.4 in | Bucket Pin Reach at Maximum Lift: 9.4 in
- of Track on Ground: 64.2 in | with Bucket on Ground: 137.3 in | without Bucket: 108.9 in
- to Top of Cab: 83.2 in | Bucket Pin Height at Maximum Lift: 121.0 in | Bucket Pin Height at Carry Position: 7.8 in | Rack Back Angle at Maximum Height: 87°
- of Track: 83.8 in
- Maximum: 159.5 in
- 8.9 in
- from Center – Machine Rear: 61.5 in | from Center – Coupler: 54.8 in | from Center – Bucket: 86.0 in
- 27.7 gal
- System: 13.2 gal | Tank: 10.3 gal
- 3.7 gal
- Engine Crankcase: 3.0 gal
- Operating: 9893.0 lb
- $36,900.00
- WAUKON
- Pre-Owned
- 61026
- 2017
- Caterpillar
- 279D
- CAT0279DPGTL04039
- Cat C3.3B DIT (turbo)
- 2605
- Available
- to Top of Cab: 83.2 in | Bucket Pin Height at Maximum Lift: 121.0 in | Bucket Pin Height at Carry Position: 7.8 in | Rack Back Angle at Maximum Height: 87°