2017 Caterpillar 279D

2017 Caterpillar 279D, Cab with Heat & AC, ISOcontrols, Standard Flow Hydraulics, 2 speed, Widetracks, Power Quick Tatch, Radio, 74 hp,9,900 LBS weight, clean track machine withexcellent service history from a localcontractor. Please contact Joe with any questions at 563 380 0928.
MoreLess
Limited Time Offer!

Selling Price -$36,900.00

  • Operators Station:Cab w/ AC
  • Operators Station:ISO Pattern
  • Operators Station:EH Joystick Controls
  • Powertrain:2 Speed
  • Booms:Self-Leveling
  • Tracks:Rubber Tracks
  • Buckets:78" Bucket
  • 2017
  • Caterpillar
  • 279D
  • Base
  • General
  • Cat C3.3B DIT (turbo)
  • Gross Power SAE J1995: 110.0 hp | Net Power: 73.2 hp | Net Power SAE 1349: 73.2 hp | Net Power ISO 9249: 73.9 hp
  • Peak Torque at 1,500 rpm SAE J1995: 195.0 lbf-ft
  • 3.7 in
  • 4.7 in
  • 203.0 in3
  • Travel Speed Forward One Speed: 4.5 mph mph | Travel Speed Reverse Two Speed: 7.0 mph
  • Standard: Loader Hydraulic Pressure: 3335.0 psi | Standard: Loader Hydraulic Flow: 20.0 gal/min | Standard: Hydraulic Power (calculated): 44.0 hp hp | High Flow: Loader Hydraulic Pressure: 4061.0 psi | High Flow: Loader Hydraulic Flow: 32.0 gal/min | High Flow: Hydraulic Power (calculated): 76.0 hp
  • (320 mm/12.6 in track): 5.6 psi | (400 mm/15.7 in track): 4.6 psi
  • Tipping Load: 5870.0 lb | Breakout Force, Tilt Cylinder: 7285.0 lb | Rated Operating Capacity: 50% Tipping Load: 2935.0 lb | Rated Operating Capacity: 35% Tipping Load: 2055.0 lb | Contact Area (320 mm/12.6 in track): 1373.0 in2 | Contact Area (400 mm/15.7 in track): 1716.0 in2
  • Inside Cab: 83.0 dB(A) | Outside Cab: 103.0 dB(A)
  • Departure Angle: 32° | Maximum Dump Angle: 39° | Reach at Maximum Lift and Dump: 23.9 in | Clearance at Maximum Lift and Dump: 89.9 in | Maximum Reach with Arms Parallel to Ground: 51.4 in | Bucket Pin Reach at Maximum Lift: 9.4 in
  • of Track on Ground: 64.2 in | with Bucket on Ground: 137.3 in | without Bucket: 108.9 in
  • to Top of Cab: 83.2 in | Bucket Pin Height at Maximum Lift: 121.0 in | Bucket Pin Height at Carry Position: 7.8 in | Rack Back Angle at Maximum Height: 87°
  • of Track: 83.8 in
  • Maximum: 159.5 in
  • 8.9 in
  • from Center – Machine Rear: 61.5 in | from Center – Coupler: 54.8 in | from Center – Bucket: 86.0 in
  • 27.7 gal
  • System: 13.2 gal | Tank: 10.3 gal
  • 3.7 gal
  • Engine Crankcase: 3.0 gal
  • Operating: 9893.0 lb
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $36,900.00
  • WAUKON
  • Pre-Owned
  • 61026
  • 2017
  • Caterpillar
  • 279D
  • CAT0279DPGTL04039
  • Cat C3.3B DIT (turbo)
  • 2605
  • Available
  • to Top of Cab: 83.2 in | Bucket Pin Height at Maximum Lift: 121.0 in | Bucket Pin Height at Carry Position: 7.8 in | Rack Back Angle at Maximum Height: 87°
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.