Bodensteiner Implement Company

  • Website: https://www.bodimp.com/
Print This Page

2025 John Deere 1575 TerrainCut™ 62 in. Fastback™ rear discharge

Information

2025 John Deere 1575 TerrainCut™ 62 in. Fastback™ rear discharge

TerrainCut™ Front Mower

7-Iron™ PRO Side Discharge or FASTBACK™ Rear Discharge Deck

Diesel Engine

Integrated ComfortCab

Compatible with select front blade, snow blower and boom attachments

Features may include:

  • Diesel engine has high-quality features to minimize operating cost
  • The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.
  • These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.
  • The 1570, 1575, 1580, and 1585 models are biodiesel compatible from the factory up to B20.
  • Key features of the engine include:
  • Economical cast-in block cylinder design for good cooling and long life
  • Indirect fuel injection (1550)
  • Direct fuel injection (1570, 1575, 1580, 1585)
  • Injects fuel directly on top of pistons for more efficient combustion
  • Delivers more horsepower per gallon of fuel
  • Improves starting
  • Develops more horsepower per gallon of fuel and improves starting
  • Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
  • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
  • Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
  • Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
  • Fuel filter with replaceable element
  • Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C)
  • Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
  • Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Enclosed engine compartment to keep out debris and lower sound levels
  • Sealed radiator compartment to keep trash and debris on outside of hood
  • Excellent torque for plenty of lugging power when operating in tough mowing conditions
  • Full-pressure lubrication for positive lubrication, even when operating on slopes
  • Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
  • 90 percent to 95 percent of dirt ejected before it reaches the paper element
  • Secondary safety element for additional filtering
  • Progressive-type air restriction indicator to let operator know when the filter needs servicing
  • Automotive-type alternator for plenty of charge to the battery and power for accessories
  • 75 amp for open-station models
  • 95 amp for ComfortCab models
  • Automatic initiation of air heater for easier cold-weather starting
  • Automotive-sensing system tells operator when engine is ready to start
  • Fuel tank features:
  • 16-U.S. gal. (60.6-L) capacity provides a 10-hour run time.

Photos

Highlights

  • Clermont, Iowa
  • 2025
  • John Deere
  • 1575 TerrainCut™ 62 in. Fastback™ rear discharge
  • Hydrostatic full time 4WD, on-demand
  • Diesel (B20 compatible)
  • Available
  • Cutting: 1-6 in. 2.54-15.24 cm
  • Specifications

    • 2025
    • John Deere
    • 1575 TerrainCut™
    • 62 in. Fastback™ rear discharge
    • Riding
    • 3TNV88C
    • Gross PS: 37.4 hp 27.5 kW
    • 3,000 rpm
    • Three
    • 100.2 cu in. 1.64 L
    • Liquid
    • Dual element dry type | Air restriction indicator: Standard
    • Direct
    • At 1,950 rpm: 80.4 lb-ft 109 Nm
    • Diesel (B20 compatible)
    • Hydrostatic full time 4WD, on-demand
    • Speed and direction control: Two-pedal foot | Hi/Lo range: No, single speed transmission
    • Hydraulic cylinder | Turns lock-to-lock: 2 maximum, 1.5 minimum
    • Internal wet disk | Individual turn brakes: Standard | Master brake: Standard, locking
    • Drive: 23x10.5-12 | Steering: 18x8.5-10
    • Type Flat free Size 11x4-5
    • 12 V
    • 95 amp
    • Automotive type
    • Travel speed: Hi forward: 0-8 mph 0-12 km/h | Speed range: 0-12 mph 0-19.3 km/h | Blade tip speed: 18,000 fpm 5,486 m/min
    • 5.1 U.S. gpm 19.3 L/min
    • Open center | Spool valve: Front lift, standard
    • Two
    • Mower deck size: 60 in. 152 cm
    • Less mower deck: 86.7 in. 220.2 cm
    • Cutting: 1-6 in. 2.54-15.24 cm
    • with ROPS: With cab, 83.9 in. 213 cm
    • With 23x10.5 tires, wide stance, 58 in. 147.3 cm
    • 62 in. 157 cm
    • 6.5 in. 16.5 cm
    • 49.2 in. 125 cm
    • 7 gauge 0.18 in. 4.6 mm
    • Tank: 16 U.S. gal. 60.6 L
    • ROPS: Factory installed ComfortCab™
    • Net weight, without mower or fuel, 2,436 lb 1,105 kg
    • One-piece stamped steel; 7-Iron PRO
    • 24 months