All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting is not a problem as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting.
Photos
Highlights
Clermont, Iowa
2025
John Deere
400E Base
Available
At full height: 2298 mm (90.4 in.) | Reach: At maximum height (D) 705 mm (27.7 in.) At ground level - bucket level (F) 1672 mm (65.8 in.)
Boom breakout force: Measured at pivot (Y) 1743.7 kg (3853 lb) Measured at 500 mm ahead of pivot (Z) 1315.4 kg (2902 lb) | Bucket rollback force capacity: At maximum height (VV) 1866.1 kg (4112 lb) / At 59-in. (1500-mm) lift height (XX) 2355.1 kg (5191 lb) / At ground-level line (ZZ) 3487 kg (1580.6 lb)
At full height: 2298 mm (90.4 in.) | Reach: At maximum height (D) 705 mm (27.7 in.) At ground level - bucket level (F) 1672 mm (65.8 in.)
Maximum (A): 2850 mm (112.1 in.) / At full height - bucket level(B) 2646 mm (104.1 in.)
3.522 m (11.5 ft)
1850 mm (73 in.)
Digging: -146 mm (5.7 in)
At full height: Measured at pivot (U) 1087 kg (2396 lb) / Measured at 500 mm ahead of pivot (V) 800 kg (1764 lb) | At 59 in. (1500 mm): Measured at pivot (W) 1307 kg (2881 lb) / Measured at 500 mm ahead of pivot (X) 1043 kg (2299 lb)