New 740D

Specifications

Compare >>> Select up to 2 models to compare specifications

John Deere740D

Add Model --Please Select-- 725D (Model year 2022) 730D (Model year 2022) 735D (Model year 2022) 94C - 30,36,40,42 2152 2162 3152 Rigid (2018) 3152 Rigid (40-ft) 3152 Rigid (45-ft) DH- 36 4040 4045 SP40 SP42 D50-35ft D60-35ft D140 D65 Rigid (40-ft) D65 Rigid (45-ft)

Add Model --Please Select-- 725D (Model year 2022) 730D (Model year 2022) 735D (Model year 2022) 94C - 30,36,40,42 2152 2162 3152 Rigid (2018) 3152 Rigid (40-ft) 3152 Rigid (45-ft) DH- 36 4040 4045 SP40 SP42 D50-35ft D60-35ft D140 D65 Rigid (40-ft) D65 Rigid (45-ft)

Cutterbar length	12.3 m 40.5 ft
Knife drive	Base: dual knife
Knife speed	490 cycles/min
Pickup reel operating speeds	6-54 rpm
Draper belts speed control	Hydraulic from cab

Type	Rigid draper

Type	Straight-line knife drive system
Length	12.3 m 40.5 ft
Knife drive	Base: dual knife
Knife speed	490 cycles/min
Cutterbar tilt	Base: hydraulic, maximum tilt 9 degree (angle)
Base skid shoe height

General
Number of slats	Six bat poly base
Fingers	Nylon
Diameter	1.067 m 3.5 ft
Height control	Hydraulic
Speed control	Hydraulic
Reel lift	Cylinder stroke: 330 mm 13 in. Total range: 391.5 mm 15.4 in.
Reel fore and aft	Cylinder stroke: 359 mm 14.1 in. Total range: 620 mm 24.4 in.
Fore of the cutterbar
Reel resume	Base
Reel reverse	Base
Operating speeds	6-54 rpm
Operating speeds (54-in. reel)

Number of slats
Diameter
Height control
Speed control
Operating speeds

Width	Side belts: 1.02 m 3.33 ft Center belts: 1.4 m 4.583 ft Center belt not included with SPW configuration
Belt depth
Cleat height	Cleats: 25.4 mm 1 in.
Operating speed	Side belts: variable up to 223 m/min 735 fpm Center belts: 212 m/min 695 fpm Center belt not included with SPW configuration
Speed control	Hydraulic from cab
Center belt reverse	Base: center belt not included with SPW configuration

Diameter	Two factory-installed options: 356 or 406 mm 14 or 16 in. Feed drum not included with SPW configuration
Feed drum fingers	Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm 0.625 in.
Number of fingers	18
Auger finger platform	Dual chevron, retracting
Finger reach	152 mm 6 in.
Drum/auger reverse	Base
Operating speed	196 rpm
Center cleanout door	Base

Type	Base: electrohydraulic
Header height sensing on the ground	Base
Header height sensing off the ground	Base

Type	Optional: hydraulic drive
Fingered augers
Size

Platform length	13.1 m 42.9 ft
Overall operating depth	2.5 m 8.2 ft
Transport width, field position	12.95 m 42.5 ft
Transport width on wheel, less dividers	2.7 m 8.9 ft
Transport length, hitch extended	15.4 m 50.4 ft