New WR00 Series Carted Wheel Rakes

Wheel Rakes
Key Features
  • Easy adjustments
  • Two-arm, left, and right side only raking
  • 8, 10, and 12 wheel models 
  • Optional center kick wheel 

More Info


Compact design for optimal transport dimensions
Wheel rake arms in transport positionWheel rake arms in transport position

The raking arms and wheels fold on the cart for a minimum transport width of 2.5 m (8.2 ft). This compact design allows an operator to easily transport and store the equipment.


Hydraulic lock out valves and wing transport chains keep the wings safely folded up during transport.

Quick field adjustments
Easy-to-set windrow and raking widthsEasy-to-set windrow and raking widths
Three settings for dual-spring rake arm suspensionThree settings for dual-spring rake arm suspension

The WR00 Series Carted Wheel Rake has two easy adjustment points to fine-tune windrows and gather more hay in each bale.

  1. Utilize the two-point-position pin and hole adjustment to set both windrow and raking widths.
  2. Set the adjustable dual-spring rake arm suspension to three different settings to match terrain and crop conditions.
Adjustable hitch to match wide array of tractor drawbar heights
Simple hitch adjustments for different heightsSimple hitch adjustments for different heights

The adjustable hitch allows for added versatility for the WR00 Series Wheel Rake. The wide array of tractor tire sizes, drawbar heights, and hitch adjustments add more convenience for hay operations.

Increased wear life of moving components
One grease zerk per wheelOne grease zerk per wheel

The wheels have 7-mm (0.28-in.) diameter tines for increased wear life. The larger-sized tines will stand up to more crop and ground movement during use.


Grease zerks also help increase the wear life of each wheel. There is one grease zerk for each wheel and two grease zerks located on the frame to keep moving parts lubricated and operative.

Carted design with wide wheel base and high ground clearance
Greater ground contact with wide wheel baseGreater ground contact with wide wheel base
Sturdy frame and high ground clearanceSturdy frame and high ground clearance

The 1.8-m (6-ft) wheel width helps keep the raking wheels in contact with the ground over rough terrain, increasing productivity. The wheel rake has 50.8 cm (20 in.) of ground clearance which helps keep the hay away from the cart frame.


Compare >>>

Select up to 2 models to compare specifications

John DeereWR00 Series Carted Wheel Rakes
Add Model
Add Model
Transport width 2.5 m
8.2 ft
Transport length 5.3 m
17.5 ft
Frame clearance 50.8 cm
20 in.
Raking width Maximum
6.4 m
21 ft
Windrow width Minimum
61 cm
24 in.Maximum
129.5 cm
51 in.
Transport height 2.75 m
9.0 ft
NOTE: Transport heights can vary based on unit setup. Dimensions are for reference only.
Implement 669 kg
1475 lb
Shipping 725 kg
1599 lb
Rake wheel
Quantity Ten
Diameter 140 cm
55 in.
Hubs Tapered bearing
Teeth per wheel 40
Teeth diameter 7 mm
0.27 in.
Flex up 19.7 cm
50 in.
Flex down 3.9 cm
10 in.
Tractor compatibility
Horsepower requirements 22 kW
31 hp
SCV Type
1 SCVQuantity
Electrical requirement
Minimum tractor size
Transport Size
Lights None
Marking SMV
Hitch jack Standard
Safety chain Standard
Set-up time
Labor hours Eight hours
Time period One year